Hey John if you still be looking, I stopped by a local GI Joe's in Portland today (not one of the two I called) and they had 6 or so Turkey Deep Fry thermometers. 12" probe, 550°f max temp in 1° increments, 2" dial I believe, I forgot to mentally note the low temp, sorry. Probably only be only a couple 3 bucks for me to ship to ya if you wanted one and can't find it locally. MM;-) aka Kona Konnaisseur miKe mcKoffee Dual Variable Transformer Rosto Roasting Rocky grindin' - Miss Silvia brewin' homeroast mailing listhttp://lists.sweetmarias.com/mailman/listinfo/homeroast |
Sometime around 18:16 1/24/2003, Mike McGinness typed: <Snip> I do still be looking. I may eventually to for a TC, but at least for the= initial built, a thermometer is much easier. <Snip> °f <Snip> the <Snip> That does sound good. I would say as long as the low temp is around 250-300, it would be fine. If it starts in the 400 range, I am not too= sure. <Snip> That would be fine. Thanks. Go for it if the low temp is low enough. Let= me know. -- John Nanci AlChemist at large Roasting and Blending by Gestalt homeroast mailing listhttp://lists.sweetmarias.com/mailman/listinfo/homeroast |
John, I'll pick one up the first of the week. I'm fairly certain the low end temp is low enough but will make sure. I'll let you know the total cost after I ship it. MM;-) aka Kona Konnaisseur miKe mcKoffee Dual Variable Transformer Rosto Roasting Rocky grindin' - Miss Silvia brewin' |